timney ar trigger

Timney AR Triggers are the producers of hand assembled, calibrated and tested precision triggers. On many kinds of guns, from the contemporary AR 15, all the way to arms such as Mosin Nagant as well as m1891/30 rifles

The majority of their triggers drop very easily into the gun, with hardly any gunsmithing required. 

The trigger group itself is available in a pre-assembled housing. That drops directly into the receiver, also keeps all of the small bits as well as pieces together.

I still have memories fresh in my head of attempting to maneuver. All the various bits of the trigger assembly into place. With the inventory parts package I purchased from DPMS. 

Eventually having to resort to sticking the lower receiver. I a clear plastic container to contain the springs which kept flying everywhere.

Setting up the Timney AR Trigger

Setting up the Timney AR Trigger is actually a breeze. The most difficult thing is actually getting the old trigger group from the gun.


In order to set up the trigger, just eliminate the grip, the basic safety, as well as the old trigger. Then slot in the Timney trigger and reinstall the grip as well as safety.


The housing was intended to be introduced into a regular AR 15 lower receiver. So those with bigger trigger group pins. Or maybe other oddities may have several problems.


The safety is also a little hard to reinsert once the Timney AR Trigger is actually installed. As the security catch on the trigger rests right against the safety itself. I'd lightly push down on the security catch to get it to allow me to put the security back in the gun.


The Feel of the Timney AR Trigger

The real test of the trigger is not exactly how simple you can install it - the real test is exactly how it feels. And also, for that element, we want a place of comparison.


When I first built my rifle, I used a typical DPMS parts package for the lower part. Regular trigger, regular safety, including a regular grip. One by one these areas have been replaced, primarily since I could not stand the quality they had.

The one part left from the initial build (as of yesterday) was the trigger. Which was terrible. 


The pull was like a long, winding mountain path in West Virginia.


As you carefully apply pressure. The trigger creeps backwards for many months. Before hitting a little bit of resistance.

Due to the strain, it's very difficult to stop before hitting the pause. This can lead to some jerking of the trigger in high-stress situations (competitions). Also some fairly poor shots when they are least welcome.


The Timney AR Trigger, in comparison, is actually like jumping off a cliff. There is a little resistance, after which it goes. Nice, sharp, fresh.


There is no guesswork concerned about just how much pressure to use. Before the rest since the break is right there.


Timney Triggers Tension Scale Trigger, Silver, 1-25 lb
  • PULL weights from 1 to 25 lbs
  • Made to exacting specifications
  • Gives accurate weights

The most effective comparison I could provide you with is in case. You had been using an icicle as a replacement for a trigger. After using the correct amount of stress, it simply breaks with no bending beforehand.


There is one additional element which makes this particular trigger. Live up to the claim of being much better compared to nearly anything better out there. The form of the Timney AR Trigger itself.


Timney AR Trigger Talking Points

The real test of the Timney AR Trigger  is not exactly how simple you can install it - the real test is exactly how it feels. And also, for that element, we want a place of comparison.

When I first built my rifle, I used a typical DPMS parts package for the lower part. Regular trigger, regular safety, including a regular grip. One by one these areas have been replaced, primarily since I could not stand the quality they had.

Hand holding a gun

Image source: Pixabay

satisfied

Ease of Use

Drop this directly into the receiver and you are all set. No playing about with springs as well as Allen wrenches. Simply drop it in and it really works as a charm. One complaint: the trigger pins have a tendency to walk a little and may well fall out of the gun - utilize anti-walk pins.

function

Feel & Function

The trigger pull is actually clean and crisp, and the reset is sweet and short. The flattened face makes for a much better trigger pull and provides a bit more surface to put large fingertips on. This particular trigger "feels" superior to every other individual stage trigger I have experimented with on an AR platform.


Selecting an AR-15 Optic

When the majority of us think of the AR 15 rifle, we are inclined to immediately connect it with the.223 Remington/5.56 NATO cartridge which is actually a good option for defensive/tactical purposes.

Nevertheless, recently, several different and much more effective cartridges like the 6.5mm Grendel, the 6.8mm SPC, as well as the .300 Blackout have been created for this particular rifle platform.


Hence, by merely changing the barrel, the bolt, as well as the magazine. We are able to quickly change this rifle to one of a number of different cartridges. That are more than ideal for every hunting or extended range shooting session.


Thus, when selecting an optic, the wonderful AR15. The very first issue you have to answer is what specific purpose would you like your AR for. So that you can select an optic that best suits the particular requirements you need.


For example, both white dot sights as well as holographic sights offer very fast target acquisition. Hence, they're perfectly designed for defensive, tactical, and simulated fighting competitions.


On the flip side, in case you plan to use the rifle of yours for hunting. Or even for long range target shooting. Subsequently a scope is usually the most desirable option.


Nevertheless, it must also be mentioned that both white dot sights. As well as holographic sights with little MOA dots. Do work nicely for close range hunting scenarios. Even some AR 15 specific scopes are likewise well designed for defensive or tactical purposes.

measuring a bullet size

Image via Pixabay


Additionally, there are a number of companies that make thermal imaging. And both lasers scopes which are ideal for use with the AR 15 – below. We are going to focus particularly on holographic sights and reflex sights.


Different Types of AR-15 Optics

Below you will find a quick rundown on some of the Ar-15 optics you can expect to find.


scope

Reflex Sights

We have to say, it is important to remember that any reflex sight doesn't make use of a laser. No great level of light will be given off ahead of the shooter.


For that reason, most "red dot" sights fall into this particular group. As a result of them consisting of an unbiased lens with a partial mirror covering. utilized for reticle projection from a place behind the independent lens.


This is next bounced off the rear of the independent lens at the markman’s eye.


Thanks to the reflective coating. It must be noted that less light is actually transmitted through the goal lens than by way of a clear lens. But, in nearly all cases, this is barely apparent by way of the shooter.


This is because the scope’s reflective coating is tuned. To show only the light wavelength given off. By the reticle projection process that is normally an LED.


Particular sights are built for ambient light that is gathered using fiber-optic systems. Some others are actually assisted with a tritium beta lamp for use in very low light conditions.

Thus, since this particular kind of reflex sight takes a wider bandwidth of light. To project the reticle onto the independent lens. They have a tendency to change the color of the light passing through the lens.


Covering a little more than those who employ an LED to produce the reticle. 


Furthermore, reflex sights are available in one of 2 different kinds comprising of the ‘heads up’ type. Featuring just one lens mounted in a bezel. With the reticle found in a tiny package positioned behind as well as below the lens.


Hence, they have got a completely different look compared to tube type sights.

The other kind of sight includes a hose with a lens positioned at each end and they seem to be much more like a scope.

Additionally, thanks to the way they are built, reflex sights are able to be mounted lower than tube reflex sights and consequently. Most shooters favor the ‘heads up’ color over the tube body color. Since they're less bulky and in the majority of instances, substantially lighter.


In addition, as a result of the form of the independent lens. Heads up sights typically have a wider area of view than tube body sights.


Nevertheless, the ‘heads up’ kind of sight is technically much susceptible to damage than tube reflexive sights.


Concerning the materials and processes that go into making the main components, the trigger shoe, hammer. Also, disconnector are made from heat treated tool steel. Very durable and corrosion and abrasion resistant. Also. they are wire EDM-cut (Electrical discharge machining. Which is an advanced form of precision cutting).


For the hammer and disconnector. Velocity Triggers ensures they are as durable as possible. By giving them a Robar NP3 treatment. Never heard of that? Well, let’s just say it a finish with a high lubricity and low friction coefficient. Which, in layman’s terms, means it reduces wear and increases the life expectancy of plated parts. And in our case, those parts are the hammer and disconnector.

scope

Holographic Sights

Currently, the one company making holographic weapon sights is actually a brand known as Electric Optic Technologies, who go under the umbrella names Bushnell and EOTech.


Holographic weapon sights are different from reflex sights because of the reticle being superimposed on the target via a laser that illuminates a hologram found within the independent lens (not projected onto it).


Hence, there's no demand for a reflective covering on the independent lens.

Rather, a photograph of the reticle is actually taken which is next sandwiched between 2 levels of optical glass and lit by a laser, which is mounted behind the independent lens.


This is projected ahead away from the shooter which produces a reticle picture that's intended to show up at a virtual fifty yards in front of the shooter.


At present, most holographic sights are actually of the "heads up" kind which numerous shooters prefer over tube body sights because of the smaller bulk.


In addition, the wider goal lens offers a substantially bigger area of view than the area of view offered by round, tube body, sights.


Additionally, since the reticle in these sights is actually a hologram, they can theoretically be any size or maybe shape, but EOTech has integrated one MOA dot (probably the smallest in the industry) mixed with a sixty-eight MOA circle.


This not only allows for really fast target acquisition, it additionally offers greater precision at longer ranges as opposed to the two MOA or four MOA dots utilized on reflex sights.


When holographic sights are actually mixed with a specific 3x magnifier, just the target is enlarged - the dot remains at an identical size whereas whenever a magnifier is added to a reflex sight, both the dot as well as the target are actually enlarged.

Our Timney AR Trigger Verdict

Timney designs the triggers with a particular aesthetic. It has less of a curve as well as a flatter face, which they say encourages a great trigger pull (straight back rather than somewhat side to side).


A straighter pull means less torque on the gun in addition to straighter shooting.

The flatter trigger face requires a bit getting used to.


50 rounds later I cannot consider just how I got along without it. This trigger is actually a work of art, a great improvement on the stock AR triggers, and simple as pie to put in.


In case you are planning on making your AR much more precise, begin with one of these. The improvement is definitely worth the price tag.


LEAVE A REPLY

Please enter your comment!
Please enter your name here